Stocks

After 3 years of development, we have developed Project K1
The stock can be able to be adapted to the athletes
Offers completely new versatile adjustments

HIGHLIGHT FEATURES
- New 3D grip gives you even more confidence and security. Versatile, ergonomic adjustments that allow you to find the optimal setting
- New absorbers absorb the vibrations where they occur. Not visible from the outside, but effective
- Fore-end has different width options and Supergrip (one width supplied, others available)
- Rear end off-set options, thanks to interchangeable sections (one supplied, others available)

OPTIONS
The K1 is available with an array of options, listed below
- Grip size - the new 3D grip gives more hand size options
- Fore-end width - available options are 42mm, 45mm, 48mm
- Rear-end offset - available options are 0, 3.5mm, 7mm
- Cheekpiece - Black II or Black III. Black III is offset further to the right, to allow the head behind the sight
- Equaliser set - weight columns are moveable (without tools) and can be used to help the balance of the stock
- Trigger guard - the new K1 trigger guard is adjustable to avoid fouling of the sling
- Cheekpiece foam - pre-cut 1mm foam set for the Black II / III (one set included with stock)

For more information (and much better photographs) please download the Grunig catalogue on this link

View Catalogue

Based on the popular RSIII
Has all the adjustment of the RSIII except the accessory rail cannot be offset
Fore-end more rounded than the RSIII
Fits Anschutz 2013 and Bleiker without modification
Adaptor available for Anschutz round actions, please contact
People who bought this item also bought:

The new Classic Sport Wood- / aluminium stock.

Will accept Grunig smallbore actions, and Anschutz 1813/1913 with an additional adaptor, see below

A great development of proven experience and modern technology that leads to success.
The Classic Sport stock combines the proven properties of wood and aluminium.
The wood forend is anatomically designed and narrow.
The buttstock made of aluminium has the proven adjustment mechanism of our existing

Beautifully machined high-grade aluminium
Excellent balance
Comfortable rounded fore-end
Multi-adjustable cheekpiece, which can be adjusted for height whilst in position
Machined to accept Grunig & Elmiger and Bleiker actions, with adaptor plates for other actions available
Buttplate carrier will accept any buttplate and can be adjusted for length in position

Expert Grip - adjustable for height, off-set left / right by 8mm and the entire grip is on a ball joint allowing adjustment in all directions

Rifle actions can be bedded conventionally with bolts into the action, or by adjustable barrel clamps

Barrel clamps can be added or removed if required

The barrel clamps can be supplied with one retaining ring per clamp, or two.
A Universal Key is included for tightening the barrel clamps (if applicable)

Silver colour has blue accents (trigger guard and adjustment wheels)
Black colour has red accents (trigger guard and adjustment wheels)

New for 2018
Milled from solid aluminium
Ergonomic rounded fore-end
Vented fore-end
Multi-adjustable grip, with a lot of available off-set
Stainless steel used on buttplate and cheekpiece carriers, with locating rings
SE Connect E cheekpiece adjustable in every direction
Available for Anschutz round actions only
1.85kg

New for 2018
Milled from solid aluminium
Quick release function allows the back-end to be changed for fast changeovers
The solid QR function operates from just two screws
Ergonomic rounded fore-end
Vented fore-end
Multi-adjustable grip, with a lot of available off-set
Stainless steel used on buttplate and cheekpiece carriers, with locating rings
SE Connect H (flap) cheekpiece adjustable in every direction
Available for most actions
1.65kg

Back-end only for the SE Shape .22H
Allows fast changeovers in 3P
Includes grip, cheekpiece and buttplate carrier

Please note, the stocks are all now BLACK

To suit Anschutz actions
Machined from high quality aluminum
Very slim fore-end with a large round radius, suitable for all hand sizes and more comfortable whilst canting
High polished surface is sealed with Nano technology for long-term protection
Optimum vibration behaviour, stability and shooting precision by wedge-shaped design, calculated by vibration test analysis
A click adjustment of the cheek piece, height adjustment, grip adjustment - all without tools and whilst in position
Pistol grip is adjustable to both sides and can be turned on its axis
The cheek piece can be adjusted in two different axis
New butt carrier offers large range of adjustment.
Very short rear end make the stock suitable for small shooters
People who bought this item also bought:

Available for most actions
ISSF derived stock
High strength alloy frame
Colour anodised finish
Adjustable pistol grip
Low profile forend
Gemini adjustable cheek piece, whilst in position
Gemini free rifle butt plate, most adjustable on the market
Telescopic butt section, short to suit smaller shooters
4 grip sizes available
Lots of colours available, please contact us with your requirements
Lead time 4-6 weeks

Wooden stock which lends the best features from the excellent recise ALU stock, but in a wooden chassis
This stock has a very slim fore-end and is suitable for all hand sizes.
Large knurled head screws at cheek piece and length adjustment offer high operating comfort without having to use any tools.
Stock extension can be positioned continuously with strong threaded columns and knurled nuts.
The actuated, positive form and force-fit clamping on the columns guarantee utmost stability.
**Note, raiser block and handstop not included.

NOTE: This stock now ships with the Anschutz 4759 rubber buttplate, not the alloy one shown

A stock, especially designed for small bore benchrest shooting, with deep centre
Adjustable cheek piece
Suitable for Anschütz Match 54 round actions (Mod. 1407 -1913)

Vertically adjustable Precise-cheek piece with fine adjustment
Consecutive engraved scales facilitate repeated adjustments of desired fine-tunings
Cheek piece adjustments can be altered without tools while in position
The long fore-end stock with integrated benchrest wedge CONTACT features the
wide two-point-rest and the soft link recoil reduction
weight approx. 2500 g

Anschutz have developed this model especially for Benchrest
The non stained stock with wide, flat , forend for use on a rest
To fit Anschutz square actions - 2007/2013

Anschutz have developed this model especially for Benchrest
The non stained stock with wide, flat , forend for use on a rest
To fit Anschutz round actions - Match 54, 18xx, 19xx etc

Anschutz have developed this model especially for Benchrest
Non stained walnut stock with long butt section
70mm wide forend for use on a rest
To fit Anschutz square actions - 2007/2013

The stock weighs 3lb 7oz including trigger guard and bedding bolts

With a 2013 action fitted and a Weaver scope mounted, the rifle will weigh 11lb 12oz approx.

For larger photos, please see the ahg Anschutz website

Anschutz have developed this model especially for Benchrest
Non stained walnut stock with long butt section
70mm wide forend for use on a rest
To fit Anschutz round actions - Match 54, 18xx, 19xx etc

The stock weighs 3lb 7oz including trigger guard and bedding bolts

With a 1913 action fitted and a Weaver scope mounted, the rifle will weigh 11lb 9oz approx.

For larger photos, please see the ahg Anschutz website